Conveyor brush cleaner electric rotary cleaner explosion-proof electric roller brush cleaner nylon brush rotary cleaner electric roller brush cleaner manufacturer passive roller brush cleaner roller brush belt cleaner electric roller brush cleaner Jining Golden Eagle electric roller brush The cleaner will not cause the tape to wander during the cleaning process. It is safe, reliable, has a long service life and has low maintenance costs. When the cleaner is working, the cleaning points are in continuous contact, the cleaning is powerful, and the cleaning effect is good. The nylon brush is made of products produced by DuPont and processed with special technology. It does not stick to materials and does not scale. No wear on the belt
Our company specializes in the production of various types of belt cleaners. The materials transported by the belt conveyor often contain sticky substances, such as coal dust, slurry powdery materials, and part of them will stick to the working surface of the conveyor belt. If it cannot be removed during unloading, the sticky material will enter the lower roller in the unloaded section, making the roller dirty and covered with these attachments. The material enters the roller shell, thereby increasing the radial load and axial load on the bearing seat, causing the bearing to wear quickly, and even causing the roller to stop rotating, causing the roller to be worn and scrapped. Material stuck to the roller shell will tear and roughen the surface rubber of the conveyor belt, accelerating the wear and tear of the conveyor belt. If the adhesive enters the tail redirecting roller, it will stick to the surface of the roller. The more sticky it becomes, the greater the adhesion will be. As a result, the conveyor belt will deviate, increase the wear of the conveyor belt, and lead to serious consequences. The residual material on the conveyor belt will also increase the friction on the roller, sometimes causing the surface rubber of the conveyor belt and the rubber layer of the roller to tear. If the cleaning device is good, the service life of roller conveyor belts, etc. can be extended. It can be seen that the cleaner plays an important role in the belt conveyor that cannot be ignored.
During operation, if you try to manually remove the attachments on the tail drum, serious personal injury or death may occur. Therefore, in order to ensure the normal operation of the belt conveyor, the attachments on the conveyor belt must be cleaned. On the basis of introducing, digesting and absorbing international advanced technology, and combining the advantages of various domestic and foreign cleaners, a new type of electric brush-type belt cleaner has been developed. The roller brush is specially made of imported wear-resistant materials and has a normal service life of one year. The above can be replaced. The future use cost of this product is only the cost of replacing the roller brush, which greatly saves the use cost. The brush-type belt cleaner has the advantages of thorough cleaning, no scratching of the belt, easy maintenance, and long service life. Since the product was put on the market, it has been widely used in industries such as power plants, coal conveying belts, chemicals, sugar, cement plants, ports, and terminals, with remarkable results. . It can be applied to various types and widths of conveyor belts in China. , extend the service life of the tape. For inquiries please call:.
(Contact number: Contact person: Guo Yan
(Company phone: Online:
Nylon brush rotating cleaner electric roller brush cleaner manufacturer